Hi Everyone!
I had a PC running Parsec at my house so I could play games remotely. I've decided to give it more use and I've made a fresh install of the vSphere 7.
I was able to set the internal graphics card as default and enable the VT-D in the processor tab in BIOS. I've also added this the graphics card as passthrough in vSphere and added it on the host side.
In order to get the passthrough to work (Error: PCI passthrough devices cannot be added when Nested Hardware-Assisted Virtualization is enabled.) I needed to unselect the option Expose hardware assisted virtualization to the guest OS but for that I needed to disable VBS first.
Then I got into another error (Failed to register the device pciPassthru0 for 1:0.0 due to unavailable hardware or software support.) And for this one I needed to disable the option "Expose IOMMU to the guest OS"
I've also added the flag: hypervisor.cpuid.v0 = FALSE
After these steps I was able to boot the machine and install Windows 10. After the installation I've installed the NVIDIA drivers but I always getting the error 43 (windows has stopped this device).
I've tried lots of things and different flags but I can't get it to work.
PS: I have an external monitor plugged into the HDMI port of the graphics card
I hope you can help me
Thanks!
Graphic Card:
NVIDIA GeForce GTX 1050 Ti
Server Specs:
