I have 2x USB modems inside a Server 2008R2 instance for remote connectivity to customers.  After upgrading to esxi 6.5, I can still see the USB modems inside the VM and inside the OS displaying as connected but when attemping to dial out it fails and throws a windows based 'modem hardware failed to respond' error even though i know the HW is fine

Interestingly I built a Server 2012R2 and a Server 2016 instance.  Same problem on Server 2012 but works on 2016?

Unfortunately Server 2016 is having major performance issues on my 6.5 and besides this due to legacy software I have to keep this inside Server 2008.  Any help greatly appreciated.

Have tried all the obvious first steps like

-rebooting host

-rebooting USB devices

Hello

We hade this night an issue, with our esxi-Server.

The esxi didn't respond at all. It wasn't possible to logon in at the local terminal.

After a reboot it worked again.

As an attachment the support-log.

Any Ideas what's the reason for no respond of the esxi?

Thank you very much and regards

Luke

In follow Up - how simple and quick would it be to take a backup/snapshot made on failed hardware - and restore it to other hardware.

I am building a Windows 2012 R2 Essentials server and considering what benefit vSphere / EXSi would be.   I don't plan on loading multiple servers as this point.   However, having a second machine available to quickly transfer / relocate to could be possible.

Thank you for your time and input.

Jim H

Добрый день всем!

Подскажите, пожалуйста, чтобы запустить ВМ с 1 сокетом, но на 16 ядер нужно приобретать Essential Kit ?

Сейчас система выдает ошибку при запуске ВМ Feature 'Virtual SMP' not licensed, requires 16 have 8

В разных обсуждениях, включая данный портал, пишут о том что базовая лицензия vmSphere которая получается после регистрации не накладывает никаких ограничений.

Поясните, пожалуйста, логику, докупать лицензии?

Спасибо!

Hello all

After registration on vm-site we have licence key - VMware vSphere Hypervisor 6 License

But when i tried start VM with one CPU and 16 cores per socket

Get  error -  Feature 'Virtual SMP' not licensed, requires 16 have 8

Question is wich type of licence we must have if we want start 2 VM with 1 cpu and more then 8 cores per socket?

Thanks!

Hello,

I Installed our new small virtual architecture with 2 x D430 and one direct storage SCV2020. Through my vcenter appliance I can see the Avago (LSI Logic) Dell 12Gbps SAS HBA and succedeed in mounting 1 datastore but my other LUNs can't be seen even after one reboot and a new discovery. My cluster HA was also active but after 1 of my 2 hosts reboot the rebooted host does not see the HBA anymore and the cluster is no longer active...

I've checked my esx

esxcfg-scsidevs –a :

vmhba2  lsi_msgpt3        link-n/a sas.51866da05571e700 (0000:05:00.0) Avago (LSI Logic) Dell 12Gbps SAS HBA external

Driver version

vmkload_mod -s lsi_msgpt3 | grep Version :

Version: 10.00.03.00-1OEM.600.0.0.2768847

Vendor info :

vmkchdev -l |grep vmhba2

0000:05:00.0 1000:0097 1028:1f46 vmkernel vmhba2

GET ESX VERSION INFO vmware –vl

  VMware ESXi 6.0.0 build-3568940

VMware ESXi 6.0.0 Update 1

On my vmware site the recommended versions according to my vendor ids are : (so the first is the one installed on my system)

ESXi 6.0 U1 

       lsi_msgpt3 version 10.00.03.00-1OEM   9.17.20.07     Partner Async          

        ESXi 6.0 U1    scsi-mpt3sas version 10.00.02.00-1OEM 9.17.20.07     Partner Async          

        ESXi 6.0 U1    lsi_msgpt3 version 08.00.01.00-1OEM   07.17.02.00    Partner Async          

        ESXi 6.0 U1    lsi_msgpt3 version 08.00.01.00-1OEM   07.17.02.00    Partner Async          

        ESXi 6.0 U1    mpt3sas version 08.00.01.00.1vmw      07.17.02.00    Partner Async          

        ESXi 6.0 U1    lsi_msgpt3 version 06.255.12.00-8vmw  N/A     VMware Inbox           

        ESXi 6.0 U1    mpt3sas version 04.00.00.00.1vmw      03.00.08.00    Partner Async

Should i change of driver ? Or is it another problem?

Thank you.

We have couple of Dell R630 with Dell 12Gbps SAS HBA connected to Compellent SCv2020. We use DELL-ESXi-6.0U3-5224934-A01 and mpt3sas driver instead of default lsi-msgpt3. I can see four "Sanity check failed for path vmhba2:C0:T[0,1]:L25[6,7]. The path is to a vVol PE, but it goes out of adapter vmhba2 which is not PE capable. Path dropped." messages every five minutes. I did not find any SAS I/O driver with Secondary LUNID (Enables VVols) feature in Compatibility Guide so I don't understand why this messages appear.  Is it a side-effect that an iscsi_vmk driver (VVol PE capable) is used on this hosts?

DELL-ESXi-6.0U3-5224934-A01

Ciao a tutti,

Ho configurato un nuovo host nella mia infrastruttura vmware.

In questa infrastruttura ho 1 cluster con 3 host.

Ora ho bisogno di mettere un nuovo host (il quarto) nel cluster, ma quando lo trascino nel cluster vedo un monitor questo messaggio:

"Put all of this host's virtual machines in the cluster's root resource pool.

Resource pools currently present on the host will be deleted."

È corretta?

Voglio mantenere tutta la confluenza attiva/non dare nessun disservizio ho solo bisogno di mettere questo host nel cluster e successivamente spostare qualche VMs.

Grazie mille

_________________________________________________________________

Hello,

i have configurated a new host in my vmware infrastructure.

In this infrastructure i have 1 clustet with 3 host.

Now i need to put a new host (the fourth) in cluster but, when i drag a host in a cluster i see a monitor this message:

Put all of this host's virtual machines in the cluster's root resource pool.

Resource pools currently present on the host will be deleted.

Is correct?

I want keep all confuguration active i only need put this host in the cluster and the next step will be move some MV.

Thx a lot

I have a datastore with several VMs for which I can download the VMDK to my workstation and mount them easily.

Problem is for one VM (which is working perfectly) I face the following,

• The datastore browser takes longer than average to open its folder (other folders opens instantly)
• The VMDK file is not stated as "virtual Disk" like in other VMs
• I can see the -flat.vmdk file in the datastore, unlike with other VMs where I cannot see the -flat expect after downloading.
• When I download the vmdk, I'm unable to mount it on Windows and it says not recognized.

Any ideas?

I am adding some new hosts to an existing 5.5 u3 cluster.  After building and adding I have them sitting in maintenance mode. To validate builds I place cluster DRS to manual and exit maintenance mode on the new hosts.  I used 8 vms to test.  One at a time I vmotioned from existing hosts to each new hosts.  Orig host 1 to new host 1, new host 1 to new host 2, new host 2 to new host 3, etc ( I have 6 new hosts.  At the end all 8 vms where running on new host 6.  I then vmotioned all 8 vms to new host 5...again worked fine.  I then vmotioned all 8 vms to new host 4 and then all vms lost network pings for an extended period...I did not time outage but at least a minute.  The vmotion showed complete while ping was not responding. Eventually all VMs start responding at same time.  Since I didn't like what occurred I wanted to vmotion these VMs back to my original hosts.  So one at a time I vmotion the VMs back.  Each one again had an extended ping not responding after the vmotion had completed.

I am ruling out vlans missing from hosts since individual vmotions worked and vm eventually comes back online. (Also each of the 8 vms tested were on different vlans.)

I am ruling out rarp issues since again individual vmotions worked and update the physical switches.

Any other thoughts as to what I can look into?  Thanks

Is it possible for me to have access to my local operating system while running the esxi host off a usb stick?  I want to be able to run the host and have access to OS so I can log into the client.  If that is not possible, from what I read I should use a VMware workstation for my host vmware machine?

Hostd.log in one the host (ESXi 5.5 Update 3)is flooded with the below message(more than 200K logs per day!):

<<2017-07-19T16:25:40.704Z [2CBEBB70 warning 'ukpStatsProvider.VSIStatsImpl'] failed to get vsi stat set: Sysinfo error on operation returned status : Not found. Please see the VMkernel log for detailed error information>>

Though it says 'see the VMKernel log for detailed error information', I don't see anything in VMkernel that is relevant to this message.

Any idea what is causing these errors and how to fix it?

All,

I see a strange behavior of ESXi host in the VCenter (Essential Kit for 3 servers).

I disconnected several local HDDs in the raid5 volume.

Local disk is changed its status to failed at the health tab.

Alarm raised.

All virtual machines are still 'Powered on' and pinging (!!!).

After 30 minutes this datastore was removed from ESXi host.

Alarm was cleared (!!!).

All virtual machines are still 'Powered on' and pinging (!!!).

There were several virtual machines: Windows 7, CUCM11.5.

Can anyone explain, is it correct behavior of the ESXi ???!!!

Why virtual machines are still 'powered on' and pinging ?

Please, direct me to any official articles/documentation.

Thanks

My vCenter server is 6.0 and I am trying to bring in a host with version 6.5 and I get the above error.

Do I need to down grade my host to v6.0?

Hi,

I have an old DL380 G7 on which I have run an SPP update from April this year, and runs Bios P67.

This model is listed on the HCL for old version like 5.0 and 5.5, including 6.0 plus updates.

I have installed on a USB key and am trying to boot (same happens for the installer), but the boot just gets stuck on "vmkibft loaded successfully"

Am at a loss on why this is getting stuck here, and looking for some guidance.

Have also tried ensuring the inbuilt raid controller has no default volumes set for boot.

Cheers

James

Say a host has 64GB of memory and vms are using up to 60GB for example.

Does it mean I can still use the rest of the 4GB?

What I mean is, does the host take what ever it needs and what ever is left is what is given to the vms to share?

If I max out the memory beyond sharing it between vms, can the host end up crashing?

Hello, I have a question for Vmotion a virtual machine failed.

The vmvare.log reported: Failed to resume on the destination: Failure.  Exiting...

The vmkernel.log :

2017-07-20T07:19:24.315Z cpu12:4091250)Migrate: vm 4091262: 3382: Setting FSR info: Dest ts = 1500506207908405, src ip = <127.0.0.1> dest ip = <127.0.0.1> Dest wid = 0 using UNSHARED swap

2017-07-20T07:19:24.317Z cpu12:4091250)WARNING: Migrate: 3451: 1500506207908405 D: Unable to set NUMA affinity mask for world 4091262

2017-07-20T07:19:24.317Z cpu12:4091250)Hbr: 3394: Migration start received (worldID=4091262) (migrateType=2) (event=0) (isSource=0) (sharedConfig=0)

2017-07-20T07:19:24.395Z cpu4:4090868)Migrate: vm 4090869: 3382: Setting FSR info: Source ts = 1500506207908405, src ip = <127.0.0.1> dest ip = <127.0.0.1> Dest wid = 4091262 using UNSHARED swap

2017-07-20T07:19:24.395Z cpu4:4090868)Hbr: 3394: Migration start received (worldID=4090869) (migrateType=2) (event=0) (isSource=1) (sharedConfig=0)

2017-07-20T07:19:24.823Z cpu14:4091265)Swap: vm 4091262: 1419: Successfully initialized normal swapfile.

2017-07-20T07:19:24.823Z cpu14:4091265)FSR: 1500: 1500506207908405 S: Swap copy helper world starting swap copy.

2017-07-20T07:19:24.823Z cpu14:4091265)SVM: 5041: SkipZero 0, dstFsBlockSize 0, preallocateBlocks 0, vmfsOptimizations 1, useBitmapCopy 0, skipPlugGrain 0

2017-07-20T07:19:24.823Z cpu14:4091265)SVM: 5139: SVM_MakeDev.5139: Creating device 1d2ca53-1aecc89-svmmirror: Success

2017-07-20T07:19:24.823Z cpu14:4091265)SVM: 5188: Created device 1d2ca53-1aecc89-svmmirror, primary 1d2ca53, secondary 1aecc89

2017-07-20T07:19:24.826Z cpu2:4091266)SVM: 2858: scsi255:255 Completed copy in 3 ms. vmmLeaderID = 4090869.

2017-07-20T07:19:24.826Z cpu2:4091266)FSR: 1186: 1500506207908405 S: Swap copy complete successfully.

2017-07-20T07:19:24.826Z cpu14:4091265)FSR: 1534: 1500506207908405 S: Swap copy complete.

2017-07-20T07:19:26.765Z cpu15:33056)ScsiDeviceIO: 2646: Cmd(0x439d808c6d00) 0x1a, CmdSN 0x582c57 from world 0 to dev "naa.690b11c00f2a300020bc0d721364929d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

2017-07-20T07:19:27.097Z cpu5:4090869)NetPort: 1780: disabled port 0x20102e5

2017-07-20T07:19:27.097Z cpu5:4090874)VSCSI: 6699: handle 69883(vscsi0:0):Destroying Device for world 4090869 (pendCom 0)

2017-07-20T07:19:27.100Z cpu6:4090871)SVM: 5041: SkipZero 0, dstFsBlockSize 0, preallocateBlocks 0, vmfsOptimizations 1, useBitmapCopy 0, skipPlugGrain 0

2017-07-20T07:19:27.100Z cpu6:4090871)SVM: 5139: SVM_MakeDev.5139: Creating device 1deca69-29ccc8d-svmmirror: Success

2017-07-20T07:19:27.100Z cpu6:4090871)SVM: 5188: Created device 1deca69-29ccc8d-svmmirror, primary 1deca69, secondary 29ccc8d

2017-07-20T07:19:27.101Z cpu5:4090869)NetPort: 1573: enabled port 0x20102e5 with mac 00:50:56:8c:57:9a

2017-07-20T07:19:27.107Z cpu5:4090874)SVM: 5041: SkipZero 1, dstFsBlockSize 1048576, preallocateBlocks 1, vmfsOptimizations 1, useBitmapCopy 0, skipPlugGrain 0

2017-07-20T07:19:27.107Z cpu5:4090874)SVM: 5139: SVM_MakeDev.5139: Creating device 208ca6c-1ffcc8a-svmmirror: Success

2017-07-20T07:19:27.107Z cpu5:4090874)SVM: 5188: Created device 208ca6c-1ffcc8a-svmmirror, primary 208ca6c, secondary 1ffcc8a

2017-07-20T07:19:27.108Z cpu5:4090874)VSCSI: 4011: handle 69885(vscsi0:0):Creating Virtual Device for world 4090869 (FSS handle 38652525) numBlocks=83886080 (bs=512)

2017-07-20T07:19:27.108Z cpu5:4090874)VSCSI: 273: handle 69885(vscsi0:0):Input values: res=0 limit=-1 bw=-1 Shares=-1

2017-07-20T07:19:27.206Z cpu9:4091271)SVM: 2858: scsi0:0 Completed copy in 89 ms. vmmLeaderID = 4090869.

2017-07-20T07:19:27.290Z cpu12:2674309)ScsiDeviceIO: 2646: Cmd(0x439d809540c0) 0x1a, CmdSN 0x582c8a from world 0 to dev "naa.690b11c00f2a300020bc0d721364929d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

2017-07-20T07:19:27.291Z cpu12:2674309)ScsiDeviceIO: 2646: Cmd(0x439d809540c0) 0x1a, CmdSN 0x582c8f from world 0 to dev "naa.690b11c00f2a300020bc0d721364929d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

2017-07-20T07:19:27.298Z cpu1:4091272)SVM: 2851: file# 0: Completed copy in 80 ms. vmmLeaderID = 4090869.

2017-07-20T07:19:27.305Z cpu1:4090869)NetPort: 1780: disabled port 0x20102e5

2017-07-20T07:19:27.305Z cpu1:4090874)VSCSI: 6699: handle 69885(vscsi0:0):Destroying Device for world 4090869 (pendCom 0)

2017-07-20T07:19:27.306Z cpu1:4090874)SVM: 2428: SVM Mirrored mode IO stats for device: 208ca6c-1ffcc8a-svmmirror

2017-07-20T07:19:27.306Z cpu1:4090874)SVM: 2432: Total # IOs mirrored: 0, Total # IOs sent only to source: 0, Total # IO deferred by lock: 0

2017-07-20T07:19:27.306Z cpu1:4090874)SVM: 2436: Deferred IO stats - Max: 0, Total: 0, Avg: 1 (msec)

2017-07-20T07:19:27.306Z cpu1:4090874)SVM: 2450: Destroyed device 208ca6c-1ffcc8a-svmmirror

2017-07-20T07:19:27.308Z cpu1:4090874)SVM: 2428: SVM Mirrored mode IO stats for device: 1deca69-29ccc8d-svmmirror

2017-07-20T07:19:27.308Z cpu1:4090874)SVM: 2432: Total # IOs mirrored: 0, Total # IOs sent only to source: 0, Total # IO deferred by lock: 0

2017-07-20T07:19:27.308Z cpu1:4090874)SVM: 2436: Deferred IO stats - Max: 0, Total: 0, Avg: 1 (msec)

2017-07-20T07:19:27.308Z cpu1:4090874)SVM: 2450: Destroyed device 1deca69-29ccc8d-svmmirror

2017-07-20T07:19:27.529Z cpu0:4091250)Swap: vm 4091262: 1289: Swapfile already initialized. No work to do.

2017-07-20T07:19:27.574Z cpu3:4091250)VSCSI: 4011: handle 69886(vscsi0:0):Creating Virtual Device for world 4091262 (FSS handle 44092557) numBlocks=83886080 (bs=512)

2017-07-20T07:19:27.574Z cpu3:4091250)VSCSI: 273: handle 69886(vscsi0:0):Input values: res=0 limit=-2 bw=-1 Shares=1000

2017-07-20T07:19:27.642Z cpu4:3265078)ScsiDeviceIO: 2646: Cmd(0x439d84839ec0) 0x1a, CmdSN 0x582d21 from world 0 to dev "naa.690b11c00f2a300020bc0d721364929d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

2017-07-20T07:19:27.643Z cpu9:4091262)VMMVMKCall: 235: Received INIT from world 4091262

2017-07-20T07:19:27.643Z cpu4:3265078)ScsiDeviceIO: 2646: Cmd(0x439d84839ec0) 0x1a, CmdSN 0x582d26 from world 0 to dev "naa.690b11c00f2a300020bc0d721364929d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.

2017-07-20T07:19:27.650Z cpu1:34778)LVM: 10060: Device naa.600b342b1d453c8db63dd6856d0000db:1 detected to be a snapshot:

2017-07-20T07:19:27.650Z cpu1:34778)LVM: 10067:   queried disk ID: <type 2, len 22, lun 11, devType 0, scsi 0, h(id) 8686437659640839581>

2017-07-20T07:19:27.650Z cpu1:34778)LVM: 10074:   on-disk disk ID: <type 2, len 22, lun 0, devType 0, scsi 0, h(id) 9512531387408291070>

2017-07-20T07:19:27.653Z cpu1:34778)LVM: 10060: Device naa.600b3429a5bbbbfdfbb1d10c6d0000db:1 detected to be a snapshot:

2017-07-20T07:19:27.653Z cpu1:34778)LVM: 10067:   queried disk ID: <type 2, len 22, lun 12, devType 0, scsi 0, h(id) 3064839419528190981>

2017-07-20T07:19:27.653Z cpu1:34778)LVM: 10074:   on-disk disk ID: <type 2, len 22, lun 0, devType 0, scsi 0, h(id) 9512531387408291070>

2017-07-20T07:19:27.655Z cpu9:4091265)SVM: 2463: Error destroying device 1d2ca53-1aecc89-svmmirror (Busy)

2017-07-20T07:19:27.655Z cpu9:4091265)WARNING: FSR: 1269: 1500506207908405 S: Failed to destroy mirror node for swap file: Busy

2017-07-20T07:19:27.655Z cpu9:4091265)WARNING: FSR: 1589: 1500506207908405 S: Swap copy helper failed, exiting.

2017-07-20T07:19:27.655Z cpu9:4091265)WARNING: Migrate: 270: 1500506207908405 S: Failed: Busy (0xbad0004) @0x418036c1231e

2017-07-20T07:19:27.656Z cpu0:4091262)WARNING: FSR: 4726: 1500506207908405 D: Failed to tranfer the swap file from source VM to destination VM.

2017-07-20T07:19:27.656Z cpu0:4091262)WARNING: Migrate: 270: 1500506207908405 D: Failed: Failure (0xbad0001) @0x418037cc01d6

2017-07-20T07:19:27.666Z cpu4:4090868)WARNING: Migrate: 5451: 1500506207908405 S: Migration considered a failure by the VMX.  It is most likely a timeout, but check the VMX log for the true error.

2017-07-20T07:19:27.680Z cpu1:4091275)WARNING: Migrate: 5451: 1500506207908405 D: Migration considered a failure by the VMX.  It is most likely a timeout, but check the VMX log for the true error.

And then, I could shutdown this vm, but it couldn't be poweron again. The vmkernel.log reported that:

2017-07-20T09:25:52.430Z cpu2:4172955)FSS: 6146: Failed to open file 'zmx_hot-3-d0fd9b24.vswp'; Requested flags 0x8, world: 4172955 [vmx], (Existing flags 0x8, world: 4090868 [unknown]): Busy

2017-07-20T09:25:52.430Z cpu2:4172955)WARNING: SwapFileOps: vm 4172956: 286: Failed to open swap file '/vmfs/volumes/5965f31b-a9168818-fc27-90b11c095e3c/zmx_hot-3_3/zmx_hot-3-d0fd9b24.vswp': Busy

2017-07-20T09:25:52.430Z cpu2:4172955)WARNING: Swap: 3547: Failed to initialize swap file '/vmfs/volumes/5965f31b-a9168818-fc27-90b11c095e3c/zmx_hot-3_3/zmx_hot-3-d0fd9b24.vswp' : Busy

Hi,

I am planning to migrate [V2V] VM's from vsphere 4.x to 6.5, I would like to know the process/best practices/ expected behavior, if any one did it in past.

Thank you,

Vkmr.

I mounted a NFS 4.1 share on ESXi 6.5a (single host, no vcenter).

This is the CLI command, but I can also mount it via web interface:

 esxcli storage nfs41 add -a AUTH_SYS -H 192.168.98.4 -v MyLinuxNFS -s /mnt/ds-esxi

My linux /etc/exports is

     /mnt/ds-esxi    192.168.98.0/27(rw,sync,no_subtree_check,anonuid=1002,anongid=1002)

After correctly mounting it, I can see it on the web client:

But I'm unable to browse MyLinuxFS, the "Datastore browser" stays in the following state forever:

Permission are correctly set, because I can write files and see the datastore via the CLI:

[root@vm2:~] echo "123test" > /vmfs/volumes/MyLinuxNFS/testfile.txt
[root@vm2:~] ls -la /vmfs/volumes/MyLinuxNFS/
total 24
drwxr-xr-x    4 root     root             5 Feb  5 19:32 .
drwxr-xr-x    1 root     root           512 Feb  5 19:32 ..
drwxr-xr-x    2 root     root            10 Feb  4 17:10 testdir1
drwxr-xr-x    2 root     root             4 Feb  4 22:26 testdir2
-rw-r--r--    1 root     root             8 Feb  5 19:32 testfile.txt

NFSv3 is working fine, but I would like to use NFSv4.1 because I'm experimenting to workaround bug KB2010953 in a bigger infrastructure.

I also tried with FreeBSD 11, it seems to support NFSv4.1, but I have the same problem described here: FreeBSD11 NFSv4.1 is not compatible with ESXi 6.5.

Any idea to make NFS 4.1 work on ESXi 6.5 ?

Hi,

I have an issue with the windows shortcut Ctrl-F which is not working on a few guests on a VMware Vsphere 5.5.

Initally the CMD regsvr32 oleacc.dll was able to bring up the search function initially but a day later the guest experienced the same issue, the only way I have a temp workaround on this is to hard reboot the RX300 test on CMD and launch, this doesn't always work.

Does anyone have any an idea what might be causing this?

A newbie here apologies if I have not provided enough information.

thanks

Hello

We are not sure if our ServerRAID M5210 and the newest stable Firmware (4.620.00-8080) is supportet or not by esxi 6.5:

Model :ServeRAID M5210 SAS/SATA Controller

VMware Compatibility Guide - I/O Device Search

Model: ServeRAID M5210e

VMware Compatibility Guide - I/O Device Search

The ServeRAID M5210 and ServeRAID M5210e are actually the same Controller. But there are diffrent Firmeware-Versions on the Compatibility Guide.

Thanks and regards

Luke