Tools upgrade in progress - NOT
I have a VM which reports that tools upgrade is in progress. It's not in progress, and I don't know how to reset this...
View ArticleClik here to view.
Need help figuring out why router configuration in a VM env only partially works
Hi there... Trying to figure out why the above setup is only partially working.All of the above reside on a single physical switch.This is a closed system (no internet).ESXi 6.5 is hypervisor for the...
View ArticleUnable to Disable SR-IOV -...
Hi, I had placed a NIC into SR-IOV mode and used the VF fine. After testing this, I wanted to go back to disable SR-IOV and go back to normal mode. But when I use "Configure SR-IOV" again in the...
View ArticleClik here to view.
ESXi 6.5 - How to make second Port Group available to add to Virtual Machine...
I'm new to VMWare/vSphere/ESXi so struggling getting this initial configuration complete. I have installed ESXi 6.5, and have been able to complete most of the configuration on the host. I installed a...
View ArticleClik here to view.
VMware-VMvisor-Installer安装时报错
HP 580G7的服务器，安装VMware-VMvisor-Installer-201701001-4887370.x86_64时，设置完毕密码，后面在扫描硬件时报错，之前试过另一台相同型号、配置的机器正常。请教大侠这是怎么回事。不甚感激。
View ArticlevCenter 6.5 - vcenter appliance stops working out of the blue, AGAIN!!
This happened to me a few months ago on a fresh install of the vcenter appliance 6.5. It just stopped working a week or two after applying an update. Services would not start and there was no...
View ArticleHP Smart Array P440ar RAID controller Warning
Hello to all,I have an ESXi 5.5.0u3 with the HPE image installed on the HP Proliant DL380 Gen9.ESXi showed me a warning on Smart Array P440ar about the firmware version: 3.56, a few days ago.What does...
View ArticleNew to HP servers, are these log entries normal?
I'm setting up some new HP servers for the first time (normally use Dell) with the HP iso for ESXI 6.5. I'm checking the logs to make sure everything is ok and I'm seeing the following in the...
View ArticleClik here to view.
Bán túi vải không dệt giá rẻ tại TPHCM
Túi vải không dệt giá rẻ thịnh hành thì giúp cho việc sản xuất, buôn bán túi vải không dệt càng thuận lợi và có doanh thu lớn. Đây là một điều hiển nhiên của qui luật trên thương trường. Túi vải không...
View ArticleClik here to view.
ESXi 6.5.0 (build number: 5969303) - point(.) in the VM name
Why I cannot type the point(.) in the VM name???
View ArticlePromiscuous mode configuration support in SRIOV physical and virtual functions
Hi All, Does ESXi 6.5 hypervisor support promiscuous mode on PF of Intel XL710 NICs? It is observed that, when two VFs belonging to same PF are assigned to two VMs and multicast traffic is sent from...
View ArticleHP Proliant Smart Array P440ar is showing alarm
Hey all, I have an ESXi 5.5.0u3 with HPE image installed on HP Proliant DL360 Gen9. ESXi showed me a warning on Smart Array P440ar regarding firmware version. So I installed latest version 4.52. Now I...
View ArticleESXi EVC MODE
vcenter 6.0 / esxi 6.0 u3 I have a v2 cpu and v4 version cpu model server Servers with v2 cpu are running v4 cpu model installed on the new server I want to migrate to v4 server Empty one v2 cpu model...
View ArticleDell precision t3620 esxi
I am looking at buying something like this for my esxi lab Dell Official Outlet Refurbished Laptops, Desktops, Servers & Monitors Precision T3620Tech SpecsProcessor: Intel Xeon E3-1220 v5...
View ArticleClik here to view.
Clik here to view.
Can anyone suggest a PCIE USB3 controller that is compatible with esxi?
I'm relatively new to esxi and this is for personal use, not any kind of production environment. Running esxi 6.5. The HCL is a bit hard to follow....is it only for chipsets instead of products? I do...
View ArticleEsxi 6.5.0U1 and LSI SMIS Providers
Hi,does anybody had success working with LSI megaraid SMIS Providers into Esxi 6.5.0U1?I successfull installed the latest vib file downloaded from LSI web site (00.66.V0.02), but I cannot connect from...
View ArticleCIM Service does not startup automatically in ESXi 6.5
Hi together, it seems that the CIM Service does not startup automatically in ESXi 6.5. For sure, I can start it through the GUI or cli with "/etc/init.d/sfcbd-watchdog start" but I use Auto Deploy. I'm...
View ArticlevSphere 6.5 U1 - Driver for Dell PERC H710 Mini
I just upgraded my Dell PowerEdge R320 to 6.5 U1. When I go into the Host - Monitor - Hardware - Storage, I get the message "The Small Footprint CIM Broker Daemon (SFCBD) is running, but no data has...
View Article/bin/sfcbd crashed problem ESXi 6.5u1 with LSI CIM provider
I installed a new ESXi 6.5u1 on Friday 25.08 and until now the sdcbd service crashed three times. I am using a LSI 9271-8i Raid Controller and installed the "lsiprovider cim 500.04.V0.66-0002" to...
View Article