Quantcast
Viewing all articles
Browse latest Browse all 8132

vlans configuration problem

Hi all,

 

I have an IBM Blade Chassis H with 2 BNT Layer 2/3 Copper Gigabit Ethernet Switch Modules firmware 5.3.0.5. Each switch is connected to one upstream switch using two trunks with two external ports. Each trunk is tagged with two different vlans (100 and 200). Blade servers are running ESXi 5.1. Internal ports are vlan tagged, pvid is 100 and tagging-pvid is disabled. Each blade is configured with one standard switch that has Management network. This standard switch is connected to vmnic0 and vmnic1.


The problem is that vmnic0 and vmnic1 don´t detect networks other than management. I am trying to use the two gigabit ethernet switches for iSCSI traffic but when I add a new vkernel with iscsi vlan tagged I can´t reach the network even though is connected and can be pinged from the switches. The kernels are connected following documentation, two vkernels with one vmnic available and the other disabled.


Thanks in advance


Viewing all articles
Browse latest Browse all 8132

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>