Here is my problem I have a hp proliant server DL360 G7 intel Xeon Cpu E5640 at 2.67ghz memory is 32 for now. I created a virtual switch and Port group tied to it. Then I created a cisco virtual router csr1000v and that i created a virtual machine using an iso file setup for CUCM 12v. Here comes my problem after the install everything is going I let the system get the background things run and go to the ip address of the cucm server. I then put in the ip address nothing happens but I can ping the cucm server and it pings back and anything thing on my lab network pings back as well using its ipv4 address. When I was the ipv4 address for the cucm as I mention nothing happens but when i use the ipv6 the cucm comes up. I'm totally at a lost of what I could be doing wrong. I search the internet and youtube be i'm still lost. Any help in the right direction i would gladly take. Thanks
↧