how to install Mellanox connectx-4 in ESXi 6.7

Hi

I cannot get ESXi 6.7 to install Mellanox ConnectX-4 in ESXi 6.7

I the UI on the ESXi I can see the Mellanox card under manage->hardware.

But it will not show up under NIC or under HBA, not sure where to find it.

If I from the CLI run the command

esxcli hardware pci list

I can also see the ESXi have found the controller correctly.

But as you can see Module ID and Module Name has not been set.

   Module ID: -1

   Module Name: None

I use the build in driver in ESXi 6.7 as it should support this controller and I have upgraded it to newest firmware so it fits with HCL

Any way to fix this?

0000:87:00.0
   Address: 0000:87:00.0
   Segment: 0x0000
   Bus: 0x87
   Slot: 0x00
   Function: 0x0
   VMkernel Name: vmnic4
   Vendor Name: Mellanox Technologies
   Device Name: MT27700 Family [ConnectX-4]
   Configured Owner: VMkernel
   Current Owner: VMkernel
   Vendor ID: 0x15b3
   Device ID: 0x1013
   SubVendor ID: 0x15b3
   SubDevice ID: 0x0010
   Device Class: 0x0207
   Device Class Name: Infiniband controller
   Programming Interface: 0x00
   Revision ID: 0x00
   Interrupt Line: 0x0b
   IRQ: 255
   Interrupt Vector: 0x00
   PCI Pin: 0x00
   Spawned Bus: 0x00
   Flags: 0x3201
   Module ID: -1
   Module Name: None
   Chassis: 0
   Physical Slot: 2
   Slot Description: RSC-UN4-88 SLOT2 PCI-E X8
   Passthru Capable: true
   Parent Device: PCI 0:128:3:0
   Dependent Device: PCI 0:135:0:0
   Reset Method: Function reset
   FPT Sharable: true

0000:87:00.1
   Address: 0000:87:00.1
   Segment: 0x0000
   Bus: 0x87
   Slot: 0x00
   Function: 0x1
   VMkernel Name: vmnic5
   Vendor Name: Mellanox Technologies
   Device Name: MT27700 Family [ConnectX-4]
   Configured Owner: VMkernel
   Current Owner: VMkernel
   Vendor ID: 0x15b3
   Device ID: 0x1013
   SubVendor ID: 0x15b3
   SubDevice ID: 0x0010
   Device Class: 0x0207
   Device Class Name: Infiniband controller
   Programming Interface: 0x00
   Revision ID: 0x00
   Interrupt Line: 0x0a
   IRQ: 255
   Interrupt Vector: 0x00
   PCI Pin: 0x01
   Spawned Bus: 0x00
   Flags: 0x3201
   Module ID: -1
   Module Name: None
   Chassis: 0
   Physical Slot: 2
   Slot Description: Chassis slot 2; function 1
   Passthru Capable: true
   Parent Device: PCI 0:128:3:0
   Dependent Device: PCI 0:135:0:1
   Reset Method: Function reset
   FPT Sharable: true