Hi experts.
I am now doing the PCI passthrouth related working and try to change the reset methods to d3d0, but it's not working after I change it in passthru.map
================================================
1077 1636 link false
1077 1656 link false
1077 1644 link false
1077 1654 link false
# LSILogic 1068 based SAS controllers
1000 0056 d3d0 default
1000 0058 d3d0 default
# NVIDIA
10de ffff bridge false
# PMC SAS HBA
11f8 8073 d3d0 false
#Memory controller: Intel Corporation Lewisburg P2SB
#8086 a1a0 d3d0 default
# PMC-Sierra Inc. ATTO Celerity FC8xEN
11f8 0832 d3d0 false
=================================================
Host has been rebooted, but reset methods still show Bridge reset and FPT Sharable is true which is different from the passthru.map
0000:bd:00.0
Address: 0000:bd:00.0
Segment: 0x0000
Bus: 0xbd
Slot: 0x00
Function: 0x0
VMkernel Name:
Vendor Name: PMC-Sierra Inc.
Device Name: ATTO Celerity FC8xEN
Configured Owner: VM Passthru
Current Owner: VM Passthru
Vendor ID: 0x11f8
Device ID: 0x8032
SubVendor ID: 0x0000
SubDevice ID: 0x0000
Device Class: 0x0c04
Device Class Name: Fibre Channel
Programming Interface: 0x00
Revision ID: 0x08
Interrupt Line: 0x0b
IRQ: 255
Interrupt Vector: 0x3c
PCI Pin: 0x00
Spawned Bus: 0x00
Flags: 0x3401
Module ID: 19
Module Name: pciPassthru
Chassis: 0
Physical Slot: 238
Slot Description: I/O Module 0
Passthru Capable: true
Parent Device: PCI 0:188:0:0
Dependent Device: PCI 0:188:0:0
Reset Method: Bridge reset
FPT Sharable: true
Is there any other actions or config files should be changed?
Many thanks.