I'm setting up some new HP servers for the first time (normally use Dell) with the HP iso for ESXI 6.5. I'm checking the logs to make sure everything is ok and I'm seeing the following in the vmkernel.log every hour:
2017-03-19T16:47:17.479Z cpu17:409028)FSS: 6751: Failed to open file 'hpilo-d0ccb0'; Requested flags 0x5, world: 409028 [sfcb-smx], (Existing flags 0x5, world: 409033 [sfcb-smx]): Busy
2017-03-19T16:51:13.325Z cpu45:66167)nhpsa: hpsa_vmkScsiCmdDone:5238: Sense data: error code: 0x70, key: 0x5, info:00 00 00 00 , cmdInfo:00 00 00 00 , CmdSN: 0x741, worldId: 0x109ea, Cmd: 0x85, ASC: 0x20, ASCQ: 0x0
2017-03-19T16:51:13.325Z cpu45:66167)nhpsa: hpsa_vmkScsiCmdDone:5238: Sense data: error code: 0x70, key: 0x5, info:00 00 00 00 , cmdInfo:00 00 00 00 , CmdSN: 0x742, worldId: 0x109ea, Cmd: 0x4d, ASC: 0x20, ASCQ: 0x0
2017-03-19T17:21:13.303Z cpu45:91639)nhpsa: hpsa_vmkScsiCmdDone:5238: Sense data: error code: 0x70, key: 0x5, info:00 00 00 00 , cmdInfo:00 00 00 00 , CmdSN: 0x744, worldId: 0x109ea, Cmd: 0x85, ASC: 0x20, ASCQ: 0x0
2017-03-19T17:21:13.303Z cpu37:66507)ScsiDeviceIO: 2948: Cmd(0x439d492785c0) 0x85, CmdSN 0x744 from world 68074 to dev "naa.600508b1001c56e2fbfb8539fd961571" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0.
2017-03-19T17:21:13.303Z cpu45:91639)nhpsa: hpsa_vmkScsiCmdDone:5238: Sense data: error code: 0x70, key: 0x5, info:00 00 00 00 , cmdInfo:00 00 00 00 , CmdSN: 0x745, worldId: 0x109ea, Cmd: 0x4d, ASC: 0x20, ASCQ: 0x0
There's a raid card in the server and two drives in raid 1 where ESXi is installed. Are these log entries about hpsa and ilo expected and normal?