new SSD has "no associated device" in ESXi 6.5

I installed an HBA and connected 4 new SSDs.  Using "esxcli storage core path list", all of the SSDs are listed, but only the first SSD gets a complete UID. 

SSD1 looks like this:

     UID: sas.51866da0bde5a100-sas.4433221100000000-mpx.vmhba5:C0.T1:L0

     Device: mpx.vmhba5:C0.T1:L0

     Device Display Name: Local ATA Disk (mpx.vmhba5:C0.T1:L0)

The other SSDs on the HBA look like this:

     UID: sas.51866da0bde5a100-sas.443322110#000000-  (the # varies for each SSD)

     Device: No associated device

     Device Display Name: No associated device

All of the SSDs work normally if only 1 is connected at a time.  So if I remove SSDs1-3 then SSD4 works fine.  I replaced the SSDs with some old HDDs, and ESXi reported all of the HDDs just fine.  Why would ESXi not work with the SSDs?