Hello All,
After install ESXi 6.0 via "VMware-VMvisor-Installer-6.0.0.update02-4192238.x86_64-Dell_Customized-A04" on Dell PowerEdge R730, everything is okay !!!
But, if I try to install ESXi 6.5 via "VMware-VMvisor-Installer-6.5.0-4564106.x86_64-Dell_Customized-A00" on Dell PowerEdge R730, my vmnic0 and vmnic1 (Intel X710 DP 10Gb DA/SFP+) are not working !!!
Does anybody know the solution ?
Thanks for your reply.
[root@R730:~] esxcli network nic list
Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description
------ ------------ ------ ------------ ----------- ----- ------ ----------------- ---- ---------------------------------------------------------
vmnic0 0000:01:00.0 i40en Up Up 10000 Full f8:bc:12:05:85:d0 1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
vmnic1 0000:01:00.1 i40en Up Up 10000 Full f8:bc:12:05:85:d2 1500 Intel Corporation Ethernet Controller X710 for 10GbE SFP+
vmnic2 0000:0c:00.0 igbn Up Down 0 Half f8:bc:12:05:85:f0 1500 Intel Corporation Gigabit 4P X710/I350 rNDC
vmnic3 0000:0c:00.1 igbn Up Up 1000 Full f8:bc:12:05:85:f1 1500 Intel Corporation Gigabit 4P X710/I350 rNDC
vusb0 Pseudo cdce Up Up 100 Full 18:fb:7b:5d:d5:ee 1500 DellTM iDRAC Virtual NIC USB Device
[root@R730:~] esxcli network nic get -n vmnic0
Advertised Auto Negotiation: false
Advertised Link Modes: 1000BaseT/Full, 10000BaseT/Full, 10000BaseT/Full, 40000BaseCR4/Full, 40000BaseSR4/Full
Auto Negotiation: false
Cable Type:
Current Message Level: -1
Driver Info:
Bus Info: 0000:01:00:0
Driver: i40en
Firmware Version: 5.04 0x800024bc 17.5.11
Version: 1.1.0
Link Detected: true
Link Status: Up
Name: vmnic0
PHYAddress: 0
Pause Autonegotiate: false
Pause RX: false
Pause TX: false
Supported Ports:
Supports Auto Negotiation: false
Supports Pause: false
Supports Wakeon: true
Transceiver:
Virtual Address: 00:50:56:52:57:61
Wakeon: MagicPacket(tm)