Hello,
I Installed our new small virtual architecture with 2 x D430 and one direct storage SCV2020. Through my vcenter appliance I can see the Avago (LSI Logic) Dell 12Gbps SAS HBA and succedeed in mounting 1 datastore but my other LUNs can't be seen even after one reboot and a new discovery. My cluster HA was also active but after 1 of my 2 hosts reboot the rebooted host does not see the HBA anymore and the cluster is no longer active...
I've checked my esx
esxcfg-scsidevs –a :
vmhba2 lsi_msgpt3 link-n/a sas.51866da05571e700 (0000:05:00.0) Avago (LSI Logic) Dell 12Gbps SAS HBA external
Driver version
vmkload_mod -s lsi_msgpt3 | grep Version :
Version: 10.00.03.00-1OEM.600.0.0.2768847
Vendor info :
vmkchdev -l |grep vmhba2
0000:05:00.0 1000:0097 1028:1f46 vmkernel vmhba2
GET ESX VERSION INFO vmware –vl
VMware ESXi 6.0.0 build-3568940
VMware ESXi 6.0.0 Update 1
On my vmware site the recommended versions according to my vendor ids are : (so the first is the one installed on my system)
ESXi 6.0 U1
lsi_msgpt3 version 10.00.03.00-1OEM 9.17.20.07 Partner Async
ESXi 6.0 U1 scsi-mpt3sas version 10.00.02.00-1OEM 9.17.20.07 Partner Async
ESXi 6.0 U1 lsi_msgpt3 version 08.00.01.00-1OEM 07.17.02.00 Partner Async
ESXi 6.0 U1 lsi_msgpt3 version 08.00.01.00-1OEM 07.17.02.00 Partner Async
ESXi 6.0 U1 mpt3sas version 08.00.01.00.1vmw 07.17.02.00 Partner Async
ESXi 6.0 U1 lsi_msgpt3 version 06.255.12.00-8vmw N/A VMware Inbox
ESXi 6.0 U1 mpt3sas version 04.00.00.00.1vmw 03.00.08.00 Partner Async
Should i change of driver ? Or is it another problem?
Thank you.